This is a set of three-section folding demolition arms with a length of 35 meters. This machine is used in China. Product features: The excavator demolition arm is divided into three-stage demolition arm and four-stage demolition arm, which are mainly suitable for the demolition of high-rise buildings. The excavator demolition arm is installed on the excavator and equipped with hydraulic shears, breaking hammers, buckets and other efficient operations.
Read MoreThe long arm of this machine was commissioned by a New Zealand customer to manufacture. It is equipped with a 1.0 cubic bucket, a brand new bucket cylinder, and two sets of oil pipes. We use high-strength steel plates for manufacturing. The machine is currently under construction in Palmerston North, New Zealand, where it is used for long distance excavation work in water areas. Friends who are interested can go to the local area to find out.
Read MoreWhen it comes to construction in water areas, in addition to using a dedicated boat to carry an excavator for construction, there is actually another solution - an amphibious excavator chassis. This machine is currently in use in China. It can walk stably and stay on soft ground such as wetlands, tidal flats, and swamps. It mainly cleans up river silt.
Read MoreThis is a special arm that Hyundai Company in South China asked us to manufacture. A long arm specially designed and manufactured for excavator piling. It is different from the large and small arms for excavation; the pile driving arm is a straight arm, which is convenient for lifting, and is equipped with a short forearm. The curved arm of the piling hammer can be connected with the forearm, so as to better control the piling and pile pressing operations of the piling hammer. Scope of application: Pullable sheet piles, rail piles, H rail piles, and H steel sheet piles are suitable for foundation engineering construction operations such as flood control, dams, pipes, earthwork, soil walls, and slope surfaces.
Read MoreThese buckets are manufactured according to the shape of Komatsu and Caterpillar. The customer sent their drawings and hoped that we can help him manufacture them. These buckets are manufactured in width from 1000-1200mm and are manufactured using the process in our factory. Perfectly meet customer requirements.
Read MoreThis is our construction site in Fujian, mainly to clean up the silt and sundries blocked by the river. The machine can work while standing on the bridge, and it fully complies with the weight limit of the bridge deck. Due to the long enough length, the configured bucket is 0.5 cubic. The requirements for the driver are relatively high, and it needs the coordination and cooperation of experienced operators and surveyors. The treatment of underwater silt is more convenient. On the one hand, the efficiency is improved, and on the other hand, the intervention of other equipment is reduced.
Read MoreCAT336 is an internationally popular medium and large excavator, and it is also a star product of Caterpillar. Because this terminal does not have professional unloading equipment installed. This project uses two specially modified CAT336 to unload the sand on the transport ship. The hydraulic cylinder of the CAT machine is large enough and powerful enough. It is equipped with a 25-meter-long arm and a 1.0-cubic bucket for operation, so it can easily serve as a "unloading worker".
Read More